Banner U-Gage Ultrasonic Sensor Instrukcja Użytkownika Pobierz pdf (Strona 13)

SENSORS

More information online at bannerengineering.com304

LIGHT GAUGING ULTRASONIC MEASURING ARRAYS RADAR

L-GAGE

LH Speciﬁcations

Sensing Beam

670 nm (1mW) visible red IEC and CDRH Class 2 laser

Supply Voltage and Current

18 to 30V dc (10% maximum ripple); 250 mA max @ 24V dc (exclusive of load)

Supply Protection Circuitry

Protected against reverse polarity and transient over voltages

Delay at Power-up

1.25 seconds

Temperature Effect

0.01% of measurement range/°C

Linearity

0.1% of measurement range

Resolution

LH30: 1 µm LH80: 4 µm LH15: 10 µm

Resolution obtained with an average of 64 readings on a white ceramic target.

Ambient Light

≤ 3000 Lux

Measurement Frequency

Dynamically adjusted from 300 to 4000 Hz depending on target conditions, or locked via LH Series congurator square.

Adjustments

None on sensor; Conguration through LH Series Congurator Software

Indicators

Green: Power ON; Flashing = target at reference distance Orange: Target inside measurement range

Construction

Housing: Aluminum Cover: Aluminum Lens: Glass Cable: PVC and nickel-plated brass

Environmental Rating

IP67

Connections

150 mm 8-pin M12/Euro-style pigtail quick-disconnect. Mating QD cordsets are ordered separately. See page 304).

Output Conﬁguration

Analog current output: 4 to 20 mA (current sourcing)

Analog output rating: 1 kΩ max @ 24V dc, max load resistance = [(Vcc-4.5)/0.02]Ω

Output Response

User adjustable output ltering via LH series congurator software.

Serial Communication Interface

RS-485, optically isolated, up to 230 KBaud

Data Formats

LH-Ring Serial Protocol

Operating Conditions

Operating Temperature: –10° to +45° C Storage Temperature: 0° to +80° C

Maximum relative humidity: 85% at +50° C, non-condensing

Vibration and Mechanical Shock

Vibration: 60 Hz, 30 minutes, 3 axes Shock: 30G for 11 milliseconds, half sine wave, 3 axes

Application Notes

Allow 30-minute warm-up for specied performance

Factory Default Settings Mode: Displacement Mode Sensor Address: Unset (address 0)

Baud Rate: 115200 Analog Output: 4-20 mA, positive slope, full range

Certiﬁcations

Hookup Diagrams

MI06 (p. 759)

Cordsets

Euro QD—Double Ended (With Shield)

See page 691

Length

Threaded 8-Pin

Straight Male to

Straight Female

Straight Male to

Straight Male

0.3 m — MQLH-801-MM

2 m MQLH-806-MF —

5 m MQLH-815-MF —

9 m MQLH-830-MF —

Euro QD—Splitter

See page 692

Length

Threaded 8-Pin

Branches Trunk

2 x 0.6 m 0.3 m CSB-M1281M1282-LH

2 x 0 m 0.3 m CSB-M1281M1280-LH

3 x 0.6 m 0.3 m CSB3-M1281M1282-LH

Additional cordset information available.

See page 679.

Euro QD (With Shield)

See page 689

Length

Threaded 8-Pin

Straight

2 m MQLH-806-F

5 m MQLH-815-F

9 m MQLH-830-F

Brackets

SMBLH1 SMBLH30 SMBLH80 SMBLH150

pg. 657 pg. 657pg. 657 pg. 657

Additional brackets and information available.

See page 620.

Serial Adapters

See page 739 Model

USB to RS-485 serial adapter

with integral communication cordset and

USB cable for easy conguration

of a single sensor or a network of sensors.

INTUSB485-LH

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

Banner U-Gage Ultrasonic Sensor Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Banner U-Gage Ultrasonic Sensor