Banner SC22-3E Safety Controller with Ethernet Instrukcja Użytkownika Strona 72
- Strona / 130
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
7.3.1 Run Mode Screen—OBI
The OBI Run mode screen displays current information about the Safety Controller, including:
• The configuration name
• Safety Output status
• Input status
• System status
• XM card status
Arrowhead designates
selected Safety Output
Configuration Name
Safety Output Status
Input Status Cause of
Output SO1 Status, or
Required Action
Figure 48. Run mode screen—OBI
Configuration Name: The top line of the display reads either the name of the configuration stored in the Safety Controller, if it has been
confirmed, or Configuration not confirmed, if it has not.
Safety Output Status: Lines 2, 3, and 4 of the screen display the status of the three Safety Outputs. The selected output will have a
small arrowhead to its left, on the screen. (The arrowhead scrolls through the Safety Outputs that are OFF, at 2-second intervals.) Line 5
of the display states the reason for the status of the selected Safety Output.
NOTE: Output faults are recoverable via a system reset (see section 7.5 System Resets and Lockout Conditions on page 74).
Safety Output Status Message Cause and/or Required Action
ON The Safety Output is ON.
ON-Delay The Safety Output will turn ON when the ON-delay time expires.
OFF
The Safety Output is OFF.
Line 5 of the display indicates the reason the Safety Output is OFF.
OFF-Delay
The Safety Output will turn OFF when the OFF-delay expires.
Line 5 of the display indicates the reason the Safety Output is in an OFF-delay.
Reset Needed
A manual reset operation needs to be performed.
Line 5 of the display indicates the name of the manual reset input to press.
Fault
A problem has been detected with the Safety Output. See section 9.3.1 Troubleshooting Fault Co-
deTable on page 83 to find additional information regarding the fault.
If the fault is due to an external device monitor (EDM) fault, line 5 of the display indicates the name
of the EDM.
Enable Mode Line 5 of the display indicates Enable Mode if a Safety Output is in Enable mode.
Input Status: If a Safety Output is OFF or turning OFF, line 5 of the display indicates information about the input that is keeping the
output OFF.
Line 5 also indicates when a manual reset operation needs to be performed.
NOTES:
• Line 5 changes to indicate each input when the status of more than one input must be displayed.
• Press the Up arrow button to pause the screen on the current input.
• Press the Down arrow button to change the last line to the next input. (Press the Down arrow button repeatedly to quickly cycle
through the inputs.)
SC22-3/-3E Safety Controller Instruction Manual
72 www.bannerengineering.com - tel: 763-544-3164 P/N 133487 rev. C
- Original Instructions 1
- Contents 2
- Contents 3
- 4 P/N 133487 rev. C 4
- Contents 5
- 1 About This Document 6
- 1.3 Standards and Regulations 7
- 1.4 Contact Us 8
- 2 Overview 9
- 2.1 Ethernet-Compatible Model 9
- 2.2 Applications 10
- 2.3 Design and Testing 10
- 2.4 Components 10
- 2.4.2 USB Connections 11
- 2.4.3 Ethernet Connections 11
- 2.4.4 SC-XMP Programming Tool 11
- 2.5.1 Onboard Interface (OBI) 12
- Accessing Fault Codes 14
- PCI Software Compatibility 15
- 2.6.2 Safety Outputs 16
- 2.6.3 Status Outputs 17
- 2.6.4 Virtual Status Outputs 17
- 2.7 System Settings 18
- 2.8 Internal Logic 19
- 2.9 Password Overview 20
- 3.3 Ethernet Cordsets 22
- 3.4 Interface Modules 22
- 3.5 Specifications 23
- 3.5.1 Dimensions 25
- 4 System Installation 26
- 4.1 Appropriate Application 26
- 4.3 Safety Input Devices 27
- SO1 SO2 SO3 28
- S = Simultaneous 29
- C = Concurrent 29
- Signal Change-of-State Types 30
- Signal Debounce Times 30
- 4.4 Non-Safety Input Devices 31
- 4.5 Input Device Resets 33
- 4.6 Safety Input Function 35
- 4.6.2 Two-Hand Control (THC) 36
- 4.6.3 Enabling Devices 36
- 4.6.4 Mute Function 37
- 4.6.5 Bypass Function 38
- 4.7.2 Safety Outputs 41
- Safety Input 42
- (ON-Delay) 42
- (OFF-Delay) 42
- (To SO 1A) 46
- (To SO 1B) 46
- 1A 1B 2A 2B 3A 3B A2 47
- 4.8 Status Outputs 50
- 4.9 Virtual Status Outputs 52
- 4.10 Commissioning Checkout 52
- 5.1.1 Configuration Tools 53
- 5.1.2 Build a Configuration 54
- Create a New Configuration 55
- Add an Input Device 55
- Finish the Configuration 57
- System Reset 59
- 5.1.4 Other Functions 60
- Export Documents 61
- Print Options 61
- Run Mode 63
- Configuration 63
- 6.2 Run Mode 64
- 6.3 Configuration Mode 64
- 6.3.3 Confirm Configuration 65
- 6.4 Edit Configuration 66
- 6.4.3 Outputs/System Settings 67
- 6.5 Add an Input 68
- 7.3.1 Run Mode Screen—OBI 72
- 7.4 Manual Reset 73
- 7.6 Reset Signal Requirements 74
- 8 System Checkout 75
- W1 W2 W3 W4 80
- 9.1 Cleaning 82
- 9 Troubleshooting 82
- 9.4 Recovering from a Lockout 86
- 9.5.1 Fault Log—PCI 87
- 9.5.2 Fault Log Recording—PCI 87
- 9.6.1 View Current Faults—OBI 88
- Device Name 89
- Fault Description 89
- Time Since Fault 89
- Fault Code 89
- Principles 90
- OFFON OFFON 91
- 10.2 Protective (Safety) Stop 92
- OpenOpen 95
- Open Open Open 96
- 24V 24V 24V 97
- 10.4 Optical Sensor 98
- 10.5 Two-Hand Control 100
- 10.6 Safety Mats 103
- Emergency Stop Hookup Options 108
- Category 2 E-Stop Circuit 108
- Category 3 E-Stop Circuit 108
- Category 4 E-Stop Circuit 108
- 10.8 Rope/Cable Pull 109
- S1 S2 S1 S2 111
- 10.9 Enabling Device 112
- ONOFF ONOFF 114
- Lockout/Tagout 115
- 10.11 Mute Sensor Pair 116
- Mute Device Requirements 117
- Inductive Proximity Sensors: 118
- 10.11.4 Mute Enable (ME) 119
- 10.11.5 Mute Lamp Output (ML) 119
- 10.11.7 Mute on Power-Up 120
- < 3s< 3s 122
- < 3s< 3s < 3s< 3s 123
- 11 Ethernet Reference 124
- 11.1 Ethernet Setting Access 124
- 11.3 Support Files 125
- Reserved 127
- 12 Glossary 128
Powiązane produkty i podręczniki dla Maszyny specjalne Banner SC22-3E Safety Controller with Ethernet
(4 strony)
(70 strony)
(2 strony)
(4 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji